Publicidad
Idiomas disponibles
Idiomas disponibles
WARNING
performing any assembly or adjustments, or
changing accessories. Such preventive safety
measures reduce the risk of starting the tool
accidentally.
TO ATTACH/DETACH BATTERY PACK OR
POWER ADAPTER (FIG. 2a & 2b & 2c)
To attach the battery pack:
Align the raised rib on the battery pack with the
grooves in the tool, and then slide the battery
pack onto the tool.
NOTICE: When placing the battery pack
onto the tool, be sure that the raised
rib on the battery pack aligns with the
groove inside the tool and that the latches
snap into place properly. Improper
attachment of the battery pack can cause
damage to internal components.
To detach the battery pack:
Depress battery-release button located on the
front of the battery pack to release the battery
pack. Pull the battery pack out and remove it
from the tool.
WARNING
accessories not recommended for use with
this tool. Any such alteration or modification is
misuse and could result in a hazardous
condition leading to possible serious injury.
To operate with FLEX 24V power adapter
WARNING
repaired immediately.
WARNING
the nameplate. If charged at voltage higher
than indicated on the nameplate, the power
cable will burn up.
The miter saw can be powered by a 24V
battery pack or a power adapter FLEX
FX0511-Z (not included) show in figure 2b.
a. Remove the battery pack from the miter saw.
b. Attach the battery adapter onto the miter saw
firmly and then connect the plug of the power
adapter to a regular power outlet (Fig. 2c).
Detach the battery pack
from the tool before
Do not attempt to modify
this tool or create
Do not use the electrical
cord if damaged. Have it
Do not use at voltage
higher than indicated on
ASSEMBLY
Fig. 2a
Fig. 2b
Cord
Power
Supply
Fig. 2c
-14-
Battery-release
Button
Release
Button
Release
Button
Battery
Pack
Indicator
Battery Adapter
Indicator
Battery
Adaptor
Publicidad
