Flex FX7141A Manual Del Operador página 15

c. To remove the battery adapter, depress the
release button, pull the battery adapter out
and remove it from the tool.
There are indicator lights on the battery adapter and the power supply respectively. To interpret the
meaning of different light colors, refer to the table below:
Battery adapter
Power supply
The power adaptor features wall-mount holes
for convenient use. Install screws in the
wall 2-1/8 inches (54mm) apart. Use screws
sufficiently strong to hold the weight of the
power supply (Fig. 2d).
Indicator
Flashing red
Red light on for 1
second, then off
Steady red
Yellow light on for
1 second, then off
Flashing green
Steady green
Steady yellow
Flashing red
Meaning
Power suspended.
Self-inspection.
Power suspended.
Self-inspection.
Normal operation.
Battery adapter is not
attached to miter saw.
Normal operation.
Battery adapter is
attached to miter saw.
Temperature protection.
Power suspended.
Fig. 2d
Wall-mount
Holes
-15-
Actions
Disconnect the plug, wait for
the red light to go out and then
reconnect the plug.
N/A
Disconnect the plug and send
the power adaptor to a FLEX
Factory Service Center or
Authorized FLEX Service Station.
N/A
N/A
N/A
Power supply cannot be used
due to high temperature. (Can be
used once the power supply has
cooled).
Disconnect the plug, wait for
the red light to go out and then
reconnect the plug.