Publicidad
Idiomas disponibles
Idiomas disponibles
CHAIN OIL
Use engine oil SAE #10W-30 during all the year or SAE #30 - #40 in summer and SAE #20 in winter.
NOTE
Never use wasted or regenerated oil, as this can cause the oil pump is damaged.
NOTE
Remember! The chain regulation controler can only turned 1/4 (right or left) on the
contrary, if you turn it more, you may brake the limit.
ENGINE OPERATION
It is very dangerous to operate a chainsaw when its components are damaged or missing. Before
starting the engine, make sure that all components, including the bar and chain are installed properly.
START
1. Fill tanks of fuel and chain oil and adjust lids.
2. Press constantly priming bulb until fuel reaches the bulb.
3. Pull the choke knob out to second. The throttle will close and the throttle will start position.
NOTE
When the engine starts immediately after stopping, leave the choke knob in the
open position.
NOTE
After pulling the choke knob out, it will return to the operating position even
when you press down with your finger. To return the choke knob to the operating
position, pull out the throttle.
4. With the saw unit securely on the ground, firmly pull the starter rope.
WARNING
Never try to start the engine holding the machine with both hands. This is
extremely dangerous, as the chain can touch your body.
97
EN
Publicidad
