Publicidad
OBJ_BUCH-3181-006.book Page 24 Thursday, April 12, 2018 9:20 AM
24 | English
Digital Laser Measure
Data transmission
Bluetooth®
Operating frequency band
Max. transmission power
Micro USB cable
– Charging voltage
– Charging current
Battery
Rated voltage
Capacity
Number of battery cells
Battery Charger
Article number
Charging time
Output voltage
Charging current
Protection class
A) For measurements from the front edge of the measuring tool, applies
to high reflectivity of the target (e.g. a white-painted wall), weak back-
lighting and 25 °C operating temperature. In addition, a deviation of
± 0.05mm/m must be taken into account.
B) For measurements from the rear edge of the measuring tool, applies
to low reflectivity of the target (e.g. a dark-painted wall), strong back-
lighting and – 10 °C to +45 °C operating temperature. In addition, a de-
viation of ±0.15 mm/m must be taken into account.
C) After calibration at 0 ° and 90 °. Additional pitch error of max.
±0.01 °/degrees up to 45 °. The measurement accuracy refers to the
three orientations of the inclination measurement calibration,
see figure H.
D) At 25 °C operating temperature. Charging time with 1 A USB charg-
er.
E) In the continuous measurement function, the maximum operating
temperature is +40 °C.
F) When using Bluetooth® Low Energy tools, it may not be possible to es-
tablish a connection depending on the model and operating system.
Bluetooth® tools must support the GATT profile.
G) Automatic switch-off time is adjustable (2, 5, 10 minutes or never).
H) The left-hand side of the measuring tool serves as the reference level
for grade measurement.
A long battery runtime is achieved by means of energy-saving measures,
such as deactivating the Bluetooth® function when not required, or re-
ducing the display brightness, etc.
The measuring tool can be clearly identified with the serial number 15
on the type plate.
Product Features
The numbering of the product features shown refers to the il-
lustration of the measuring tool on the graphic page.
1 Display
2 Measuring button[
] (can be used at the front or side)
3 Soft key[
]
4 Plus button[+]/Select to the right
1 609 92A 4F4 | (12.4.18)
5 Zoom button
GLM 120 C
6 Carrying strap lug
7 Measuring pin release button
Bluetooth®
8 Measuring pin
F)
(4.2 low-energy)
9 On/Off/Delete button[
2402 – 2480 MHz
10 Camera button
8 mW
11 Minus button[–]/Select to the left
USB 2.0
12 Soft key[
5.0 V
13 Function button[Func]
1000 mA
14 Laser warning label
Li-Ion
15 Serial number
3.6 V
16 Micro USB port
3120 mAh
17 1/4"- Tripod socket
1
18 Laser beam outlet
19 Camera
2 609 120 7..
20 Reception lens
D)
approx. 5.5 h
21 Carrying strap
5.0 V
22 Micro USB cable
1000 mA
23 Battery charger*
/II
24 Protective pouch
25 Laser target plate*
26 Laser viewing glasses*
27 Tripod*
* The accessories illustrated or described are not included as
standard delivery.
Display Elements (selection)
a Result line
b Target display (crosshairs)
c Display tilt angle
d Date/time
e Measurement reference level
f Connection status
g Battery charge-control indicator
h Measured-value lines
i Settings (soft key)
j Selected measuring function
k Internal memory (soft key)
l Integrated help function (soft key)
m Back (soft key)
n Start screen (soft key)
o Tool settings
Initial start-up
Battery Charging
Use only the chargers listed in the technical data. Only
these battery chargers are matched to the lithium-ion bat-
tery of your measuring tool.
]
]
Bluetooth® not activated
Bluetooth® activated, connection established
Bosch Power Tools
Publicidad
