Ingeteam INGECON SUN 10TL M2 Manual De Instalacion Y Uso página 42

Ingeteam
Connecting with a smartphone or tablet
1. Install the INGECON SUN Monitor app.
2. Log in as an authorized installer and press the
3. Follow the steps given to access the unit's web application.
Connecting with a computer
1. Connect to the Wi-Fi network generated by the inverter.
2. In the web browser, access the web application at http://169.254.1.1. You must log in as an authorized
installer.
When connecting for the first time, a wizard will guide you through the steps for an optimal configuration.
11.3. Connecting to the electricity grid
Once the unit has been configured, close the external AC thermomagnetic circuit breaker in order to supply AC
voltage to the unit.
From this moment the unit is ready to be connected to the electricity grid. If the unit does not connect, verify if
there are any alarms or manual stops.
42
First connection to the electricity grid
icon to connect to the inverter locally.
ACL2012IQM01_ - Installation and Operation Manual