Descargar Imprimir esta página

GE DPVH890 Manual Del Propietario E Instalación página 10

Profile secadoras
Ocultar thumbs Ver también para DPVH890:

Publicidad

Idiomas disponibles

Idiomas disponibles

About cycle options.
NOTE:Not all featuresare available on all dryer models.
SETTINGS
kku2,'
Settings
Under the SETTINGSoption, you can
adjust the volume or the brightness of
the displag.
VOLUME
m End of Cgcle (signal) volume can be set
from HIGH, PIED,LOW or OFF.
m Control Sounds volume can be set from
HIGH, PIED,LOW or OFF.
About dryer features.
DISPLAYBRIGHTNESScan be set from
HIGH, PIED or LOW.
After gou have made gour selection,
press ENTER.
Drum
Lamp
Before replacing the light bulb, be sure to unplug the drger power cord or
disconnect the dryer at the household distribution panel bg removing the
fuse or switching off the circuit breaker. Reach above dryer opening from
inside the drum. Remove the bulb and replace with the same size bulb.
Engage the handleposts
Built-In
Rack Dry System
A handg drging rack mag be used for drging items such as tennis shoes.
Place items flat on the drying rack and block such items as wool sweaters
and delicate fabrics. Drg with low heat.
To install the Built-In Rack Dry Sgstem
1. Make sure the drum of the drger is oriented so the rack drging sgstem is
on the left side of the drger.
2. Pull the drging rack screen out from the left side and engage the handle
"posts" in the opposite baffle slots.
3. Place the garment on the rack and close the door.
4. Press the DRYERRACK button.
5. Select desired TIPIE.
6. Press the START/PAUSE button.
NOTE:
m Do not use this drging rack when there are other clothes in the drger.
m Make sure to detach the drging rack at the end of the cgcle and fullg
retract the screen back into the baffle.
10

Publicidad

loading

Este manual también es adecuado para:

Upvh890