Publicidad
Idiomas disponibles
Idiomas disponibles
About the dryer control panel.
Dry Cycles
The dry cycle controls the cycle time for the drying process. The chart below will help you match
the dry setting with the loads.
Sensor Cycles
COTTONS
For cottons
and most linens.
NORMAL/
For loads consisting
of cottons
and poly-blends.
MIXED LOAD
WRINKLE
FREE
For wrinkle-freeleasy care and permanent press items.
ACTIVE WEAR
Clothingworn foractivesports exerciseand some casual wear. Fabricsincludenew
technology finishes and stretchfiberssuch as Spandex.
DELICATES
For lingerie a nd special-carefabrics.
SPEED DRY
For small loads that are needed ina hurry,such as sports or school uniforms.Can also be
used if the previouscycle left some items damp, such as collars or waistbands.
Timed
Dry
Cycles
STEAM
REFRESH
For slightly wrinkled dry garments. Significantly reduces wrinkles on 1-5 garments.
Selecting a higher number of garments for the cycle (e.g.,selecting 5-garment load
for a 1-garment load) may result in excessive wetting of clothes. After the SteamRefresh
Cycle, the unit will beep and display "Garments Ready" and "0:00." If the unit is not turned
off or if the door is not opened, the dryer will continue to tumble for 30 minutes. At the end
of 30 minutes, it will display "0:00" and "Cycle Complete."
A single extremely light fabric item may need to have an additional item included
in the steam refresh cycle to achieve optimum results.
STEAM
For use with larger loads than STEAMREFRESH. I deal for loads left in dryer for an extended
DEWRINKLE
time. Selecting a larger cycle than needed (e.g.,selecting Large Load for a half-full dryer)
may result in excessive wetting of clothes.
WARM UP
Provides 10 minutes of warming time to warm up clothes.
My Cycle (on some models)
MY CYCLE
Press to use, create or modify custom dry cycles,
Timed Dry
Use to set your own dry time. TIMED DRY is also recommended
for small loads.
To use TIMED DRY:
1. Turn dry cycle dial to TIMED DRY.
2. Select the drying time by pressing the A and V buttons. You can increase the time in 10-minute
increments
up to 2V2 hours.
3. Select the DRY TEMP.
4. Close the door.
5. Press START/PAUSE.
Sensor
Dry Level
The sensor continuously
monitors the amount of moisture in the load. When the moisture
in your
clothes reaches your selected dry level, the dryer will stop.
EXTRA DRY
Use for heavy-duty fabrics or items that should be very dry, such as towels.
MORE DRY
Use for heavy or mixed type of fabrics.
DRY
Use for normal dryness level suitable for most loads. This is the preferred cycle
for energy saving.
LESSDRY
Use for lighter fabric (ideal for ironing).
DAMP
For leaving items partially damp.
6
Publicidad
