Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
Instructions
INSTALLINGTHE PEDESTAL(if desired}
-ACAUTION - Due tothesize and
weight
of
these products,
and to reduce the risk of personal
injury
or damage
to the product,
TWO PEOPLE ARE
REQUIRED FOR PROPER INSTALLATION.
KIT CONTENTS
[] 4 Support pads
[] 4 Mounting screws
[] Drawer divider
TOOLS YOU WILL NEED
[] Phillips-head
screwdriver
[] 7 mm Socket wrench
[] 9/16" Open-end wrench
or adjustable wrench
INSTALLATION
PREPARATION
Remove the packaging.
The drawer divider is taped at the top of the
shipping carton. Remove the divider and set aside
for final installation.
Flatten the product carton to use as a pad to lay
the washer or dryer down on its side. Continue
using the carton to protect the finished floor in front
of the installation
location.
REMOVE THE LEVELING LEGS
r_
carefully
lay the washer or dryer on its side
to access the leveling legs on the bottom
of
the appliance.
IMPORTANT: Do not lay the washer
or dryer
on
its back! Do not remove the shipping
bolts on the
back side of the washer. The bolts must remain in
place until the washer
is returned
to an upright
position.
r_
use an open-end wrench to remove the
washer or dryer leveling legs.
Backout and remove
all 4 levelinglegs
41
Publicidad
