Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
Instructions
CONNECTING
THE DRYER
TO THE GAS SUPPLY
r_
Install a female 3/8" NPT elbow at the end
of the dryer gas inlet.
Install a 3/8" flare union adapter
to the female
elbow.
IMPORTANT: Use a pipe wrench to securely
hold on to the end of the dryer gas inlet
to prevent twisting the inlet.
NOTE: Apply pipe compound
or Teflon ® tape to
the threads of the adapter
and dryer gas inlet.
New Metal
__
FlexibleGas
,j
Adapter
Line Connector.----__,
_
__
1/8" NPT
__.,
PipePlugfor
Adapter_
>_
_/IC_J
CheckingGas
Elbowj
......
[_,.J
Inlet Pressure
Ss'NPT
Shut-OffValve
Items not supplied
_-_""
Pipe size at
least 1/2"
[]
Attach the flexible metal gas line connector
to
the adapter.
Apply pipe compound to the
adapter and dryer gas inlet.
[-C']Tighten the flexible gas line connection,
using
two adjustable
wrenches.
CONNECTING
THE DRYER
TO THE GAS SUPPLY {cont.}
@
Install a 1/8" NPT plugged tapping
to the dryer
gas line shut-off valve for checking gas inlet
pressure.
Install a flare union adapter
to the plugged
tapping.
NOTE: Apply pipe compound
or Teflon ® tape to
the threads of the adapter and plugged tapping.
Apply pipe compound or
__
Teflon ® tape to all male X_--------b_'_
/
Plugged
threads.
_
_t¢"
Tapping
Shut-OffValve__
!
E] Tighten all connections,
using two adjustable
wrenches.
Do not overtighten.
r_ open the gas shut-off valve.
19
Publicidad
