Descargar Imprimir esta página

Timken VHIN-G3-35 Manual De Instrucciones página 14

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

4. INSTALLATION
Remove the packaging and place the induction heater on a non-ferrous, stable and level
surface. Put heaters with wheels on the brake to prevent the heaters from moving.
Check the connection voltage against the rating plate on the unit.
Each heater is equipped with a plug. As there is a wide variety of plug types, the provided plug
may not fit. In such cases, obtain a proper plug. It must be fitted by a qualified electrician. There
are different fitting options depending on the type of cable on the heater:
Fitting options VHIN-G3-35, VHIS-G3-75 and VHIS-G3-100
120V/230V 1 phase heaters
Brown
Blue
Green/Yellow
Fitting options VHIS-G3-150, VHIS-G3-200, VHIS-G3-400, VHIN-G3-600 and VHIN-G3-800
400V/450V/500V 2 phase heaters
Brown
Black
Green/Yellow
Ensure that the power supply cable cannot come into contact with the workpiece to be
heated. Insert the plug in a socket outlet with grounded connection.
Switch on the device by means of the main switch. The machine is starting up.
14
120V/240V 1 phase heaters
Phase
Zero
Ground
480V/600V 2 phase heaters
Phase
Phase
Ground
Black
Phase
White
Zero
Green
Ground
Black
Phase
Black
Phase
Green
Ground

Publicidad

loading