Descargar Imprimir esta página

HOLZMANN MASCHINEN FSM25AUTO Instrucciones De Servicio página 51

Rectificadora de superficies

Publicidad

Idiomas disponibles

Idiomas disponibles

18.3.4
Manual mode
18.3.5
Automatic mode
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
• Set selector switch manual | automatic (1) to
manual mode
• Travel X-axis by turning hand wheel table
longitudinal travel (1)
• Travel Y-Axis by turning hand wheel table
cross travel (2)
• or push the key FORWARD or BACKWARD
on "PREPARE PAGE".
Travel Z-axis by turning hand wheel height
adjustment (3)
The travel per impulse of the hand wheel can
be set via the "Multiple" keys.
or on the operation display with key UP or
DOWN on "WORK PAGE".
• Switch on the grinding wheel with the key
on "PREPARE PAGE"
• Switch on the coolant pump with the key on
"PREPARE PAGE"
• Clamp the workpiece and set the grinding
wheel to the workpiece in manual mode
• Confirm the value Z-axis (starting position)
by keying WORK POSITION SETTING
• Set rise up value
This is the value that the grinding wheel
moves up after completion of a grinding cycle.
e.g.: 10 mm
• Key Rise up value field
• Input field appears
• Enter 10 and confirm with Enter
• Delete incorrect entry with Del or Clr and
reenter value
NOTE:
This procedure is the same for all value
entries!
OPERATION
51
FSM25AUTO

Publicidad

loading