HTW EON -S026EON-R32 Manual De Usuario E Instalacion página 57

SPLIT 1X1 EON
6.1 AIR CONDITIONING ERRORS
Check before repair:
Type of fault
The air conditioning
does not work
Poor cooling or heating
performance
6.2 REMOTE CONTROL ERRORS
Normal failure phenomena:
Type of fault
Unable to control stops
or fan speed
1. Check if the power is off.
2. Check whether the switch is on or whether the fuse is blown.
3. Check the batteries in the remote.
4. Check whether the entered operating time has been reached.
5. Check if any working radio equipment works within 1 meter.
1. Check if the intake vents are blocked.
2. Check whether the switch is on or whether the fuse is blown.
3. Check the batteries in the remote.
4. Check whether the entered operating time has been reached.
5. Check if any working radio equipment works within 1 meter.
1. When the air conditioner is in DRY or SLEEP mode, the fan speed cannot be
controlled.
2. When the air conditioner is in COOL AIRFLOW TEST or DEFROST mode.
3. (In HEAT mode), the fan motor stops.
4. When the air conditioner is in COOL or DRY mode, if the air conditioner
switches to antifreeze mode, the fan speed cannot be controlled.
5. When the air conditioner is in COOL or DRY mode, if the air conditioner
enters freeze prevention mode, the speed cannot be controlled.
6. When the air conditioner is in HEAT mode, if the air conditioner enters
heating overload prevention mode, the fan speed cannot be controlled.
USER AND INSTALLATION MANUAL
6. TROUBLESHOOTING
Checks to be made
Failure Reason
57
