HTW EON -S026EON-R32 Manual De Usuario E Instalacion página 61

SPLIT 1X1 EON
7.4 POSITION FOR OUTDOOR UNIT
• Avoid direct sunlight.
• Away from heat source, steam source, leakage of flammable gas, smoke and dust.
• Select a place that is away from rain (snow) and has good ventilation.
• Neighbors will not be affected by the blown wind and noise, or discharged water.
• The place that is easy to install and service.
• Mounted on the solid and reliable foundation will not increase noise or shock.
• To get high cooling performance, make sure the unit's front, rear, left and right sides must be located in
an open area.
• The outlet is proposed to be in open air, any obstacle will affect the performances.
• The installing distance must be required as Fig. 2 shows.
7.5 TUBING SELECTION
• Ensure that the level (height) difference of indoor and outdoor units and the length of tubing meet the
requirement in the Table 1.
• If the tubing is longer than 7m, but shorter than 15m, refrigerant should be supplemented according to
Table 1.
• If the installation position of the outdoor unit is higher than indoor unit and the tubing is longer than 10m,
added a oil trap on the gas tubing for every 8m.(Fig 3)
Indoor
Height
Unit
difference
Outdoor Unit
USER AND INSTALLATION MANUAL
At least 10cm
Outdoor Unit
At least
15cm
Fig.2
Outdoor Unit
Oil trap
Indoor Unit
7. INSTALLATION
At least
40cm
At least 2m
Fig.3
61
