HTW EON -S026EON-R32 Manual De Usuario E Instalacion página 62

USER AND INSTALLATION MANUAL
7. INSTALLATION
Table 1
Model
HTW-S026EON-R32
HTW-S035EON-R32
HTW-S052EON-R32
The above dimensions are for reference only, actual product will prevail.
7.6 FIXING INSTALLATION PANEL
• Dismantle the metal installation board of the indoor unit. Adjust the installation board to horizontal po-
sition.The height difference between the left and right sides of the installation board should less than
5mm. (Fig 4)
• Drill holes and insert plastic expansion tubes at the appropriate locations on the wall and fix the insta-
llationboard on the wall with M5x30 screws. Ensure that there must be at least 4 fixed points in the wall.
Ensure installation board to horizontal position.
• Drill holes as Fig. 5 shows. The hole, 80mm in diameter, should slightly slide down outwards.
• Cut PVC tubes at a slight angle in the length shorter than wall thickness and inset it into the hole. (Fig.5)
• Mount the wall cap.
62

Supply hose
2*2,5+T
2*2,5+T
2*2,5+T
Installation board
Indoor
Wall cap
Installation board
Fig.4
Wall
Outdoor
PVC tube
Small angle
Fig.5
SPLIT 1X1
Interconnecting hose
4*1,5+T
4*1,5+T
4*1,5+T
EON