USER AND INSTALLATION MANUAL
8. WIFI SETUP
Continue connecting by switching to Other Mode. Tap AP Mode, set the network via AP mode by following
steps:
• Switch the air conditioner to AP mode when in Smart mode by long press the reset button for 5 seconds;
then it will buzz, the heating icon on the device will flash slowly (approx. 1.5 times/s). This indicates that
the device has entered AP mode.
• Connect to Hotspot: Click on Connect (open phone settings: WLAN). Connect to the access point named
"SmartLife-XXXX" (WIFI name may vary depending on the actual product), then the network setting will
start as shown in the screenshot.
• After successful network configuration, tap "Done", and the device list interface will pop up.
8.5 NOTICES
1.
The control quality of the app is affected by your smartphone, Wi-Fi network, distance from the router,
and Internet status. It has nothing to do with the unit itself.
2.
If you find that you couldn't control the device with your smartphone, please check your internet status
at first, then check if you are successfully connected with the unit. If everything is ok, delete the device
in your app and start the procedures again.
3.
If you still can't solve the problems with the above methods, please use the unit with normal control
and then ask for after-sale service.
76
SPLIT 1X1
EON