Intercom Function; Connecting To A Tv; Door Bell Connection - golmar Stadio Plus Manual De Instalación

Ocultar thumbs Ver también para Stadio Plus:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

110
I
ntercom function.
Platea Plus monitor and T-940 Plus telephone have intercom facility between two units of the
same apartment . To enable this function check the following conditions:
- One of the units has been configurated as master and the other unit as slave with
intercom, as described on pages 100 to 106.
In case to intercom one monitor with one telephone, configure the monitor as master.
- Link the INT terminal of the units, as it is shown on the enclosed diagram.
To establish an intercom communication lift the handset and press the intercom push button;
acoustic tones will be reproduced on the handset confirming the call is in progress or
that the other unit is communicating with the door panel. To establish communication lift
the handset of the called unit . If during an intercom
communication a call is made from the
door panel, acoustic tones will be heard
on the master unit handset and the picture
will appear in case of a monitor;
press the intercom push button of the
master unit to establish communication
with the door panel, or press the door
release push button to activate the lock
release.
The reproduced acoustic tones are different
depending on their provenance, that allows the
user to distinguish where the call is made from.
C
onnecting the Platea Plus monitor to a video recorder or TV.
If your TV or video recorder have a SCART
connector, it will be possible to view
the picture from the door panel on the TV
screen.
Remove the end of line jumper and connect the coaxial
cable between terminals 17 (shield) and 20 (hot)
of the SCART connector.
Only available for Coaxial installations.
D
oor bell push button connection.
The monitors and telephones can be used to receive the calls made from the apartment door,
saving the use of a bell. Wire the push button of the apartment door to the 'HZ ' and ' '
monitor or telephone terminals.
The reproduced acoustic tones are different depending on their
provenance, that allows the user to distinguish where the call
is made from. If during a conversation a call is made from
the apartment door, acoustic tones will be reproduced on the
hanset to advise that someone is calling.
OPTIONAL CONNECTIONS
CN4
_
V
+
V
A
D
Malla
in
out
+ _
INT
A
CN4
_
V
V
+
A
D
Malla
in
out
-
HZ-
D INT

Publicidad

Tabla de contenido
loading

Tabla de contenido