DOORPANEL PROGRAMMING
Coming from previous page
3
rd
modify value
3
rd
3
rd
panic code
End of the access control menu. Use "UP" arrow key to move to the previous options.
Press CANCEL to exit from the access control menu and return to the main menu.
If CANCEL is pressed twice the panel will exit from the programming menu.
code on
07:15
07:15
code on
10:13
code off
14:55
:5555
A
Defines the starting time from which
it's possible to activate the lock release
by entering the third code.
To set this time press OK: the display will show
the message
modify value
the hour value from 0 to 23 and minutes
value from 0 to 59 and confirm by pressing
OK. If CANCEL is pressed the former value
will be restored.
For a proper operation of this function,
the system clock must be correctly adjusted,
as described on page 85.
Defines the closing time from which
it's possible to activate the lock release
by entering the third code.
To set this time proceed as described on the
previous menu.
In case that starting and closing times have
equal values, the third code will be enabled
all the time.
Proceed as described on "1st code" to modify
the fourth code. When this code is used
to activate the lock release, the system sends
an alert message to the porter's exchange
(if exists).
89
ccess control menu.
. Key in
Continue