golmar Stadio Plus Manual De Instalación página 84

DOORPANEL PROGRAMMING
It will be necessary to enter into the programming menu to configure the system properties.
For a proper system operation, the menus marked with an asterisk must be configurated.
Two different programming menues are available: installer, that allows to modifiy any of the
system properties and user, that only allows changes that do not affect the system operation.
Programming options with black text and white background are availables in both menues;
options with white text and black background are only availables on installer menu.
The first time you enter into the programming menu, the display messages will appear in spanish.
Press OK when the display shows the message
castellano
If the option Direct Call Code (page 85) is disabled, it will not be necessary to fill the repertory
name for a proper system operation.
Use the arrow keys to move through the programming menu. Option changes will be validate
by pressing OK key, even if CANCEL key is pressed later.
Use CANCEL key to exit from the configuration menu. The door panel will automatically exit
from the configuration menu after 90 seconds with no operation.
golmar
pin code
pin:____
*
configuration
access control
repertory
. Press OK to change to english or till the desired language appears.
16:30
configuracion
To enter into the main programming menu,
press key symbol and enter
the installer PIN code (factory default: 1315)
or the user PIN code (factory default: 1111).
or
On this menu the system configuration options
can be changed.
Press OK to enter into this menu.
Access control options can be changed on
this menu. Press OK to enter into this menu.
This menu allows to fill the repertory and
to change its options.
Press OK to enter into this menu.
P
rogramming menu.
: the display will show now
Continue
83