golmar Stadio Plus Manual De Instalación página 87

86
Coming from previous page
display mESsAgE
golmar
display mESsAgE
golmar
installer pin
modify value
installer pin
user pin
modify value
user pin
DOORPANEL PROGRAMMING
The door panel display shows this message
when the system is on stand-by position.
Use this text to show i.e. the building name
or address.
To change this message press OK and proceed
as described on page 93.
Once the modification has been done the
display will show the message
settings recorded
to the initial screen.
Allows to change the installer PIN code to enter
into the installer programming menu
:1315
(page 83).
Do not let know this code to untrained
people; any change on the programming
menu could produce a system failure.
To change the PIN code press OK: the display
:1315
will show the message
Key in the new code and confirm by pressing
OK. If CANCEL is pressed the former value
will be restored.
Always use a four digits code.
:9876
Allows to change the user PIN code to enter
:1111
into the user programming menu (page 83).
Any change on this menu will not affect
the system operation.
To change the PIN code press OK: the display
will show the message
Key in the new code and confirm by pressing
:1111
OK. If CANCEL is pressed the former value
will be restored.
Always use a four digits code.
:5432
C
onfiguration menu.
, and will return
.
modify value
.
modify value
Continue