cecotec DRUMFIT INDOOR 6000 COMPACT Manual De Instrucciones página 49

2. BEFORE USE
- This appliance is packaged in a way as to protect it during transport. Take the device out
of its box and remove all packaging materials. You can keep the original box and other
packaging elements in a safe place. This will help you prevent damage to the device when
transporting it in the future. In case the original packaging is disposed of, make sure all
packaging materials are recycled accordingly.
- Make sure all parts and components are included and in good conditions. If there is any
piece missing or in bad conditions, contact the official Cecotec Technical Support Service
immediately.
Box content
- DrumFit Indoor 6000 Compact exercise bike
- Assembly kit
- Instruction manual
- 2 AA console batteries
3. ASSEMBLY
Assembly instructions
Caution: please, tighten the screws after the machine has been completely assembled
according to the instructions.
Step 1:
Open the cardboard box, remove the parts and then, place the main frame (255) on the floor.
Assembly the front (24) and rear (25) stabilisers to the main frame (255) by using the fixed
spanner, pinch bolt (262), flat washer (257) and cap nut (263). Fig. 2
Step 2:
Insert the saddle post (40) into the main frame (255) using the adjustment knob (58).
Secure the saddle (42) to the saddle support (63) using the saddle adjustment knob (268) and
the saddle post (40).
Adjust the left and right pedals into the main frame (255). The right pedal (R) is screwed in by
turning clockwise and the left pedal (L) counterclockwise. Fig. 3
Step 3:
Insert the handlebar stem (29) into the main frame (255) and fix it using the adjustment knob
(58).
Then, fix the handlebar (32) to the stem (29) using the flat washers (257) and the screws (259).
Finally, fix the console (264) to its bracket (265), using the adjustment knob to tighten them.
Fig. 4
DRUMFIT INDOOR 6000 COMPACT
ENGLISH
49