Publicidad
Idiomas disponibles
Idiomas disponibles
5-3
6
3.2.
Preparing and use
APPLIANCE LOCATION
The temperature of environment must not be higher than 70°C. Ensure good
ventilation in the room in which the device is being used. The device should
always be fixed on an even, stable and dry surface. Position the device such that
you always have access to the manual release (manual mode). The power cord
connected to the appliance must be properly grounded and correspond to the
technical details on the product label.
INSTALLATION
NOTE: the electric installation should be done by a qualified electrician also any
of its further modifications. The installation must be completed with the power
off/unplugged power supply!
The gate opener will open the gate to the right-hand side as its default setting. By
default, the opener mounts on the right-hand side (see below pictures):
Before installation test the gate opener by plugging it into a power source and
pressing the remote. Press the opening button (a), the output gear rotates (b),
then press the stop button (a), the output gear stops rotating. Finally, press the
closing button (a), the output gear rotates to the opposite direction. This will give
you an understanding of the way in which the opener will move the gate and
ensures it works properly:
EN
Note: extra fixing parts are spare parts
Spring Washer ø8
Gate moving rack
8
8
Publicidad
