Publicidad
Idiomas disponibles
Idiomas disponibles
h)
Do not use sharp and/or metal objects for cleaning (e.g. a wire brush or a
metal spatula) because they may damage the surface material of the
appliance.
SAFE REMOVAL OF BATTERIES AND RECHARGEABLE BATTERIES
Remove used batteries from the device using the same procedure by which you
installed them.
Recycle batteries with the appropriate organisation or company.
DISPOSING OF USED DEVICES
Do not dispose of this device in municipal waste systems. Hand it over to an
electric and electrical device recycling and collection point. Check the symbol on
the product, instruction manual and packaging. The plastics used to construct the
device can be recycled in accordance with their markings. By choosing to recycle
you are making a significant contribution to the protection of our environment.
Contact local authorities for information on your local recycling facility.
TROUBLESHOOTING
Problem
The device must be
inspected monthly to
check its proper
operation and spot
any damage
The gate only opens,
but
not closing.
Possible cause
1. The power supply is
disconnected.
2. Fuse is blown.
3. Control board X2 terminal
wrongly wired.
1. Photocell wrongly wired.
2. Photocell wrongly
installed.
3. Photocell is blocked by
objects.
4. Sensitivity of meeting
obstacle is too high.
EN
Solution
1. Connect the power supply.
2. Check the fuse (FU) and
replace
if blown.
3. Re-wiring according to this
user
manual.
1. If not connect photocell,
please
ensure the infrared terminal
and GND
terminal has a jumper wire; if
connect
photocell, please ensure the
wiring is
correct and the photocell
type is normally closed (NC-
type)
2. Ensure that the photocell
mounting position can be
mutually
aligned.
3. Remove the obstacle.
4. Reduce the sensitivity of
Publicidad
