Publicidad
Idiomas disponibles
Idiomas disponibles
• Press "PROG" button for 3 sec. to enter into basic menu. The indicator light L0
will flicker once, then L1 will be steady on.
• Press "+" button twice to select the reverse option. The indicator light L3 will
be steady on.
• Press "SET" button once to enter into setting mode. The indicator lights L1-L5
will show the current setting. (The default is L2).
• Press "+" or "-" button to set the sensitivity of meeting obstacles. The indicator
lights L1-L5 will show the different sensitivity of meeting obstacles. The less the
indicator lights are on, the more the sensitivity will be. L1-L5 are all off means
to cancel the Auto-reverse function.
• Press "SET" button once to save the setting and system will automatically exit.
The indicator lights L1-L5 will be on in sequence, then all will flicker once and
go off.
NOTE: The default setting of this function is suitable for gate weighting 500 kg and
the glide rail for running the gate is smooth, if this function is not workable or
reverse frequently, please adjust the settings to reduce or increase a little bit.
SLOW STOP DISTANCE SETTING (L4)
Setting a slow stop distance enables the gate to run more smoothly, which will
extend the service life of gate and gate opener.
Operation instruction:
EN
Publicidad
