MSW Motor Technics MSW-GDOOR-002A Manual De Instrucciones página 92

• Simultaneously press the three buttons "SET"、"+" and "-" for 3 sec. The
indicator lights L1-L5 will be on in sequence, then all will flicker once and off.
Save and exit.
CONTROL BOARD ERROR INSTRUCTION
The indicator light will display the error during gate door running:
3.3.
Device use
POWERING ON, TESTING TRAVEL AND LIMIT STOP SWITCH
• Ensure that the outer cover has been fitted and fastened back onto the motor
base.
• Before powering up the gate opener make sure the gate can travel by hand in
manual mode.
• Slide the gate to between the middle of the posts, approximately (see below
picture left).
• Lock the manual release spanner (key locked) in readiness for automatic mode.
EN
Indicator light status:
- OFF
- Flicker
Status
meaning
Obstacles
meet during
gate opening
Obstacles
meet during
gate closing
Running
time over 60
sec
Infrared
photocell
disconnecte
d
No hall
sensor
No gate
travel