Publicidad
Idiomas disponibles
Idiomas disponibles
Remote control
doesn't
work.
Press OPEN, CLOSE
button, the gate is
not
moving, motor has
noise.
Arrived at open or
closed
limit switch, but
motor
didn't stop.
Leakage switch
tripped.
1. Battery level is too low.
2. Remote control not
paired.
1. Gate moving is not
smoothly.
2. Hall sensor damaged.
1. Magnetic limit switch
damaged.
2. Polarities of the two limit
switch stops are opposite.
3. Hall sensor part
damaged.
Power supply wires short
circuit or motor wires short
circuit.
EN
obstacle.
1. Change the battery.
2. Pair the remote control to
the gate
opener.
1. Adjust the motor or gate
according
to the actual situation.
2. Replace the hall sensor.
1. Change the magnetic limit
switch.
2. Switch over the two limit
switch
stops.
3. Change the hall sensor
part.
Check wiring.
Publicidad
