Publicidad
Idiomas disponibles
Idiomas disponibles
TEL: +1 (314)-679-4200
SKF Lubrication Systems Germany GmbH
EMAIL: robert.collins@skf.com
This Declaration of Incorporation is issued
under sole responsibility of the
manufacturer. Lincoln Industrial Corporation
hereby declares that the partly completed
machinery stated below:
Name: FlowMaster II - Caterpillar branded
Model number(s): 494-0424
Description: Rotary-driven hydraulic
pump (85876) series C
Year of CE: 2023
in its intended use, is in conformity with the
relevant union harmonization legislation:
Machinery Directive 2006/42/EC
(Article 13 Partly Completed Machinery)
I, the undersigned, of SKF do hereby declare that the partly completed machinery specified above, in its intended use, conforms to the
requirements of the above Directives and Harmonized Standards at the time of placing the above product on the market.
___________________________________
Robert Collins
Technical Compliance Manager
St. Louis, MO, U.S.A.
2023/08/31
Declaration of Incorporation *
Manufacturer name/address:
Lincoln Industrial Corporation
5148 N. Hanley Road
St. Louis, MO 63134 U.S.A.
Authorized to compile the technical file:
Heinrich-Hertz-Straße 2-8
69190 Walldorf, Germany
TEL: +49 (0) 6227-330
and conforms to the following harmonized
standards:
EN ISO 4413:2010
Hydraulic fluid power - general rules and
safety requirements for systems and their
components.
EN ISO 12100: 2010
Safety of machinery. General principles
for design. Risk assessment and risk
reduction.
EN ISO 809:1998+A1:2009
Pumps and pump units for liquids -
common safety requirements.
EN 12162:2009
Liquid pumps - safety requirements -
procedure for hydrostatic testing.
EN 349: 1993
Safety of machinery - minimum gaps
to avoid crushing of parts of the human
body.
FAX: +1 (314)-679-4367
www.skf.com
WEBSITE:
3
DOCUMENT NUMBER
404689.DoI
The following EHSR (Essential Health and
Safety Requirements) have been applied:
1.1.2a – 1.1.2b – 1.1.2c – 1.1.2d –1.1.3
– 1.1.5 – 1.2.2 – 1.2.5 – 1.3.2 – 1.3.3 –
1.3.4 – 1.3.6 – 1.3.7 – 1.3.8 – 1.5.3 – 1.5.4
– 1.7.1 – 1.7.1.1 – 1.7.3 – 1.7.4
The manufacturer maintains a technical file
summary sheet containing test reports and
product documentation:
Technical file summary sheet number:
RA404581-00
The partly completed machinery shown
above should not be put into service until the
final machinery into which it is to be
incorporated has been declared in conformity
with the provisions of the directive, where
appropriate.
*
Indicates change.
Publicidad
