Publicidad
Idiomas disponibles
Idiomas disponibles
MAINTENANCE/SANITISING/WATER PROBLEMS
Initial start-up
(review instruction on the individual chemical containers for amounts)
1
Once spa is full and running add a scale preventative (stain and scale inhibitor) to prevent stain and scale
formation.
2
Test and adjust total alkalinity to level indicated on test kit.
3
Test the pH and balance as per test kit.
4
Test the chlorine level and add chlorine to the skimmer basket when required.
5
Set temperature and filtration cycle to desired setting. (Default is F4 – recommended)
Always add a chemical in small amounts, less is best!
Weekly maintenance:
1
Add stain and scale inhibitor weekly as directed on container. This is the most important chemical for the
spas health. Failure to use this can cause a build up of calcium, lime scale and metals that can damage your
spa and void your manufacturers warranty.
2
Add spa clear weekly as directed on the bottle.
3
Clean filter basket at least once a week
Note: Remove any objects floating on the water before removing filters or filter basket or they may be sucked into
the pump.
Note: Spa should not be left running unattended without filters and filter basket in place.
Periodic Maintenance:
1
The use of a thermal insulated hard cover reduces evaporation and heat loss.
– treat the cover with a vinyl protector and clean regularly
2
Drain and refill spa every two to four months depending on usage.
3
Greases, oils and organic waste can accumulate in the filter cartridge reducing the effectiveness of
disinfectant. Clean the filter cartridge every two months with filter cleaner as directed.
4
Once you have established a comfortable water temperature, leave the thermostat at that temperature. Rapid
changes in temperature consume more energy.
PROBLEM
Cloudy water
Coloured Water
Foaming
Scale deposits
Odour
Eye/skin irritation
THE CANADIAN SPA COMPANY OWNERS MANUAL
POSSIBLE CAUSE
Suspended particles
High pH (test to verify)
Poor filtration
High dissolved solids
Dissolved metals
Fragrance
High concentration of oils,
soaps and organic compounds
High calcium level
High pH
High alkalinity
High level of organic contaminates
Low pH and/or alkalinity
Combined chlorine due to
organic contamination
SOLUTION
Add spa clear
Add Ph reducer
Clean filter w/ Filter Clean
Empty spa and re-fill
Add Stain & scale inhibitor
Reduce amount of fragrance
Add Defoamer
Rinse people and suits prior
to entry
Add Stain & scale inhibitor
Balance pH
Balance pH
Increase the amount of Spa
Tabs and check Ozonator
Add Alkalinity Increaser
Increase the amount of Spa
Tabs and check Ozonator
11
Publicidad
