VALBERG FBI 16S43 A XAD929C Instrucciones De Uso página 25

C
Useful information
Moving the appliance
• If the appliance must be moved, try to keep it in the vertical
position. If absolutely necessary, it can be positioned on its
back.
Seals
• One of the factors that cause odours to form in the
dishwasher is food that remains trapped in the seals. Periodic
cleaning with a damp sponge will prevent this from occurring.
46 EN
C
Useful information
Troubleshooting tips
Before calling for service
Reviewing the charts on the following pages may save you from calling for service
Problem Possible causes
Fuse blown, or the circuit break
tripped.
Dishwasher doesn't start
Power supply is not turned on.
Water pressure is low
Door of dishwasher not
properly closed.
Twisted or trapped drain hose.
Filter clogged.
Water not pumped from
dishwasher
Kitchen sink clogged.
47
What to do
• Replace fuse or reset circuit
breaker.
• Remove any other appliances
sharing the same circuit with
the dishwasher.
• Make sure the dishwasher
is turned on and the door is
closed securely.
• Make sure the power cord is
properly plugged into the wall
socket.
• Check that the water supply
is connected properly and the
water is turned on.
• Make sure to close the door
properly and latch it.
• Check the drain hose.
• Check the filter system.
• Check the kitchen sink to
make sure it is draining well. If
the problem is the kitchen sink
that is not draining, you may
need a plumber rather than a
serviceman for dishwashers.
EN