Publicidad
Idiomas disponibles
Idiomas disponibles
B
Using the appliance
Extension hose
• If you need a drain hose extension, make sure to use a similar drain hose.
• It must be no longer than 4 meters, otherwise the cleaning effect of the dishwasher could
be reduced.
Syphon connection
The waste connection must be at a height less than 1000 mm (maximum) from the bottom
of the dishwasher.
Positioning the appliance
• Position the appliance in the desired location. The back should rest against the wall behind
it, and the sides, along the adjacent cabinets or walls.
• The dishwasher is equipped with water supply and drain hoses that can be positioned
either to the right or the left sides to facilitate proper installation.
Built-In Installation (for the integrated model)
Step 1. Selecting the best location for the dishwasher
The installation position of dishwasher should be near the existing inlet and drain hose and
power socket.
Illustrations of cabinet dimensions and installation position of the dishwasher.
1. Less than 5 mm between the top of dishwasher and cabinet and the outer door aligned to
cabinet.
90 °
Electrical, drain and
water supply line
connection
820-870
mm
2. If dishwasher is installed at the corner of the cabinet, there should be some space when
the door is opened.
14
90 °
80
100
Space between cabinet
bottom and floor
600 mm
EN
B
Using the appliance
Dishwasher
Door of
dishwasher
Minimum space
of 50mm
NOTE
Depending on where your electrical outlet is, you may need
to cut a hole in the opposite cabinet side.
Step 2. Aesthetic panel's dimensions and installation
NOTE
Follow the specific installation instruction for attaching the
aesthetical door panel.
Fully-integrated model
Install the hook on the aesthetic panel and put the hook into the slot of the outer door of
A
dishwasher (see figure
). After positioning of the panel, fix the panel onto the outer door
B
by screws and bolts (See figure
).
15
Cabinet
EN
Publicidad
