Publicidad
Idiomas disponibles
Idiomas disponibles
Description
The major components of transfer "stick"
pump models are a differential air-operated
motor and a double-acting reciprocating
pump tube.
This low-pressure (2:1 ratio) pump
includes a 2 in PT outside diameter (e) bung
adapter that allows installation directly onto
a 55-gallon (200/205 l) drum.
The pump is equipped with a low-level
cut-off valve. Should fluid level become low
this valve prevents pump from operating at
excessive speed and in a dry condition or
from pumping air. Aerated fluid will cause a
meter to measure inaccurately.
Pump specifications
Differential air motor
Piston diameter × stroke
Effective piston area
1)
Air inlet
Maximum air pressure
Pump tube
Fluid outlet
Maximum fluid pressure
2)
Displacement per cycle
Maximum free flow delivery/minute
Recommended continuous delivery/minute
1)
The effective piston area of a differential air motor is equal to one-half actual area of piston.
For details on air motor, refer to manual 397873.
2)
At 100 psi (6.9 bar) air pressure
Accessories
Item
Description
338977
16-gallon drum cover
with gasket
318040-4
55-gallon drum cover
CAUTION
Do not operate this pump
without personal protective
equipment. Pump can gen-
erate noise levels above
85 dBa that could result in hearing loss.
Failure to comply could result in
personal injury.
2
/
in × 4 in (52 mm × 102 mm)
1
16
1.67 in
2
(10.8 cm
2
1
/
in NPTF inside diameter (i)
4
200 psi (13.8 bar)
3
/
in NPTF (i)
8
400 psi (27.6 bar)
5.4 in
3
(88 cm
3
)
2)
7 gallon (26.5 l)
4
1
/
gallon (16.1 l)
4
Table 2
Table 1
)
6
Dimensions
1)
2)
(1 346 mm)
4)
34 in
(864 mm)
29.1 in
(740 mm)
3)
1)
Air inlet
2)
Air exhaust
3)
Fluid inlet
4)
Fluid outlet
Fig. 1
53 in
Publicidad
