Corghi A 2024 Manual De Uso página 23

from using the machine under the infl uence of
alcohol or drugs capable of affecting physical
and mental capacity.
The following conditions are essential:
- The operator must be able to read and under-
stand all the information in this manual.
- Make sure you have a thorough knowledge
of the capabilities and characteristics of this
machine.
- Keep unauthorised persons well clear of the
area of operations.
- Make sure that the machine has been installed
in compliance with established legislation and
standards.
- Make sure that all machine operators are suit-
able trained, that they are capable of using the
machine correctly and that they are adequately
supervised during their work.
- Never leave nuts, bolts, tools or other equip-
ment on the machine to avoid the risk that they
could become entrapped between moving parts
during work.
- Do not touch power lines or the inside of elec-
tric motors or other electrical equipment until
the power has been disconnected and locked
out.
- Read this manual carefully and learn how to
use the machine correctly and safely.
- Always keep this user manual in a place where
it can be readily consulted when working with
the machine and consult it whenever you are
in need of confi rmation or explanations.
WARNING
Do not remove or deface the safety Danger,
Warning or Instruction decals. Replace any
missing or illegible Danger, Warning or Instruc-
tion decals. Missing or damaged decals can be
obtained at your nearest Corghi dealer.
- When using and carrying out maintenance on
the machine observe the unifi ed industrial ac-
cident prevention regulations for high voltage
industrial equipment.
- Any unauthorised alterations made to the ma-
chine automatically release the manufacturer
from any liability in the case of damage or ac-
cidents attributable to such alterations. Specifi -
cally, tampering with or removing the machine's
safety devices is a breach of the regulations for
industrial accident prevention.
WARNING
Operator's manual MTS 20" - MTS 24" - A 2024
When operating or servicing Corghi equipment
do not wear ties, loose fi tting clothes, necklaces
or wristwatches and any other articles that could
become entrapped by moving parts. Tie back
long hair or cover with a scarf or a cap.
DESCRIPTION OF TYRE
CHANGERS
The MTS 20", MTS 24" and A 2024 are electro-
pneumatic tyre changers.
The machines are designed to mount and de-
mount tyres on all types of integral wheels with
drop centre and weights and dimensions as
described in the heading TECHNICAL BRIEF.
The machine is solidly constructed. It operates
with the wheel in a vertical position for bead
breaking and horizontal for mounting and de-
mounting tyres. All machine movements are
controlled by the operator by means of the
pedals.
TECHNICAL BRIEF
A 2024
- Table top clamping capacity:
• inside clamping A 2024 .............from 13" min
• outside clamping A 2024 .............. 10" to 24"
- Rim width: .........................................3.5" to 14"
- Maximum tyre diameter: ..........1100 mm (43")
- Maximum tyre width: ..................360 mm (14")
- Bead breaker opening:
• single-phase DV ......... 115±10%Volt 50/60Hz
Power ............................................... 0,75 Kw
Speed .............................6 rpm and 15 rpm
Torque ............................................. 115 Nm
• monofase .......................... 115±10%Volt 60Hz
Power ............................................... 0,75 Kw
Speed .............................................. 8,5 rpm
Torque ............................................. 800 Nm
• motor air
Speed .............................................. 6,5 rpm
Torque ............................................. 800 Nm
- Air pressure ........................................8 - 10 bar
- Weight ....................234 kg (T.I. version 248 kg)
- Noise level when running ..............≤ 70 dB (A)
EN
23