Corghi A 2024 Manual De Uso página 24

MTS 20" - MTS 24"
- Table top clamping capacity:
• inside clamping MTS 20" ............... 13" to 23"
• outside clamping MTS 20" ............ 10" to 20"
• inside clamping MTS 24" ............. da 13" min
• outside clamping MTS 24" ........ da 10" a 24"
- Bead breaking pressure: .. 15000 N (at 10 bar)
- Bead breaking opening ....................... 320 mm
- Max. diameter of tyre ............... 1100 mm (43")
- Max. width of tyre ........................ 305 mm (12")
- Air pressure ........................................8 - 10 bar
- Table top rotation torque: ..1200Nm (at 400V
3ph)
- Table top rotation speed:
• MTS 20" / MTS 24" .................................8 rpm
• MTS 20" / MTS 24" DV ....................6 - 18 rpm
- Power supply voltage
• single-phase .......115-230±10%Volt 50/60Hz
• three-phase .........230-400±10%Volt 50/60Hz
• MTS 20" / MTS 24" DV ...... 230±10%Volt 1ph
50/60Hz
- Motor rating
• single-phase ......................................0,75 kW
• three-phase ........................................0,75 kW
• MTS 20" / MTS 24" DV .......................0,55 kW
- Weight
• MTS 20" / MTS 24" ................................ 220 kg
• MTS 20" / MTS 24" T.I. .......................... 230 kg
- Noise level when running ..............≤ 70 dB (A)
OPTIONAL ACCESSORIES
KDP MK2 Kit for SP2000....................8-11100013
SP2000 Kit ........................................... 801255567
SP2000 upright ...................................8-11100026
SP2000D pneumatic bead breaker ... 801255567
SX1000 Kit ............................................ 801250542
Set of 4 motorcycle wheel adapters . 801258650
Set of 4 8-24" adapters
for 10-20" turntable ............................. 801263517
SX1000 bead lifter............................... 801248740
RFT rim clamp kit ................................ 801255584
PU1500 basic module ........................8-11100027
PU1500 upright ...................................8-11100030
Bead presser-lifter kit .......................8-11100027
24
SPECIFIED CONDITIONS
OF USE
The MTS 20", MTS 24" and A 2024 tyre chang-
ers are designed exclusively for mounting and
demounting tyres, using the tools with which the
machines are equipped in accordance with the
instructions in this manual.
WARNING
Any other operations carried out on the ma-
chine are considered improper use and shall
be construed as negligence.
The machine is equipped with an infl ation system
that is independent from the systems described
above. Extreme caution must be exercised during
the use of the machine infl ation system (read
INFLATION heading).
WARNING
When working with the machine it is strongly
recommended to avoid using equipment or
tools not manufactured by CORGHI.
Figure 7 shows the positions assumed by the
operator during the various stages of work with
the machine.
A Bead breaker
B Tyre demounting and mounting
C Infl ation area.
WARNING
The tower tilting operation must be carried
out from work position C (fi g.7), keeping your
hands well away from all moving parts of the
machine.
WARNING
To stop the machine in an emergency:
- unplug from the electrical supply;
- isolate the air supply network by disconnecting
the shut-off valve (rapid insert).
Operator's manual MTS 20" - MTS 24" - A 2024