Publicidad
Idiomas disponibles
Idiomas disponibles
SAFETY
HAZARDS AND SAFETY PROVISIONS DURING SERVICING
During servicing, watch out for the following hazards and provide for the countermeasures
indicated below:
► Source of hazard: appliance mechanics
Hazard
Risk of cutting due
to sharp edges
► Source of hazard: risks associated with the environment in which the appliance is used
Hazard
Presence of satu-
rated steam
NOTE: Only applies to electrical appliances.
► Source of hazard: electric power
Hazard
Risk
of
electric
shock caused by
live components
3301300_ut_GB_rev.2
Where or in which situations
does the hazard occur?
When handling sheet-
metal parts
Where or in which situations
does the hazard occur?
Condensation and drip-
ping on electrical parts
Where or in which situations
does the hazard occur?
• Under protective panels
• Under the control panel
• Under protection covers
Countermeasures
• Pay special care during
this activity
• Wear personal protective
equipment in accordance
with safety regulations
Countermeasures
• Periodic servicing of the
appliance wiring diagram,
to be carried out only
by expert technicians of
an authorised customer
service
Countermeasures
• Operations to the electric
system may be carried
out by authorised and
qualifi ed staff only, in ac-
cordance with the relevant
applicable laws.
• Specialist procedure
• Comply with the correct in-
stallation requirements as
per section "Installing the
appliance" of the installa-
tion manual.
• Disable the power supply
before removing the pro-
tections
ENGLISH
Safety device
None
Safety device
None
Safety device
• Protection
panels
• System
switch-dis-
connector
9
Publicidad
