Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
If the appliance is to be out of use for a lengthy
period, proceed as follows.
Cut off the mains electricity supply using the
1)
appliance's master switch.
Clean the appliance and the surrounding
2)
areas thoroughly.
INSTRUCTIONS AND WARNINGS FOR SERVICING
NOTE: Carefully read the hazards
mentioned in section "Hazards and safety
provisions during servicing" on page 9.
Keep the appliance at peak effi ciency by car-
rying out the scheduled servicing procedures
recommended by the Manufacturer. Proper
servicing will ensure the best performance, a
longer working life and constant maintenance
of safety requirements.
WARNING: Before carrying out any
servicing procedure, activate all the safety
devices provided and decide whether staff
at work and those in the vicinity should be
informed.
In particular, turn off the electricity supply
using the circuitbreaker and prevent access
to all devices which might people's health
and safety at risk if activated.
Also make sure that during the maintenance
procedure, that the operator is always able to
check whether the plug is disconnected from
the power outlet.
22
LENGTHY DOWNTIMES OF APPLIANCE
SERVICING
Spread a fi lm of edible oil over the stainless
3)
steel surfaces.
Carry out all the servicing procedures.
4)
Leave the appliance uncovered and the coo-
5)
king chambers open.
At the end of each session of use and when-
ever necessary, clean:
– The well (see page 23).
– The accessories (see page 24).
– The appliance and the surrounding environ-
ment (see page 23).
Every 1250 working hours have skilled, author-
ised personnel carry out the following operations:
– Check that the safety thermostat is working
correctly.
– check that the electrical system is in good
working order.
SERVICING
3301300_ut_GB_rev.2
Publicidad
