Signature Kitchen Suite SKSCR2401P Manual Del Propietário página 16

en-us_main.book.book Page 16 Thursday, June 29, 2023 10:56 AM
16 OPERATION
2
Slide the drawer back until it lowers into place
on the support. Close the drawer.
Removing/Assembling the Drawer
Support
Removing the Drawer Support
1
Press the levers on either side of the drawer
support.
2
Keeping both levers pressed, lift the drawer
support slightly and remove it from the rail
system.
Assembling the Drawer Support
1
Pull both drawer rails out until they stop.
2
Line up the bottom edges on the sides of the
drawer support with the groove in each rail
and then lower the support until it clicks into
place.
Shelves
Detaching/Assembling the Shelf
The shelves in the refrigerator are adjustable to
meet individual storage needs.
Adjusting the shelves to fit items of different
heights will make finding the exact item you want
easier.
CAUTION
• Make sure that shelves are level from one side to
the other. Failure to do so may result in the shelf
falling or spilled food.
• Do not clean glass shelves with warm water
while they are cold. Shelves may break if
exposed to sudden temperature changes or
impact.
• Glass shelves are heavy. Use special care when
removing them.
1
To detach, tilt up the front of the shelf and lift
the shelf straight up.
2
Pull the shelf out.