3M PELTOR WS ALERT XP Manual Del Usuario página 13

EN
8.4. LISTEN TO FM RADIO
8.4.1. SEARCH STATION
(Figure. 8)
Short press (~0,5 s) the Menu button [M] to enter search
station mode. Short press (~0,5 s) the [+] or [–] button to
initiate a search. The radio station frequency will be
confirmed by a voice message.**
SMART TIP: If you short press (~0,5 s) the Menu button
[M], you will always start the FM radio.
NOTE: Radio reception depends on the topography and
the environment you are in. If the reception is poor, try to
change area if possible.
8.4.2. STORE STATION
(Figure. 9)
Short press (~0,5 s) the Menu button [M] three times,
voice message "Store station". Short press (~0,5 s) the
[+] or [–] button to select position. Long press (~2 s) the
Menu button [M] to store the station. A voice message will
confirm, "Confirmed".
8.4.3. PRESET STATION
(Figure. 10)
Short press (~0,5 s) the Menu button [M] two times to
enter the preset station mode. A voice message will
confirm "Preset station". Short press (~0,5 s) the [+] or [–]
button to browse and select preset station. The radio
station frequency will be confirmed by a voice message.
8.5. 3M™ CONNECTED EQUIPMENT, MOBILE
APPLICATION
Connect your "WS™ ALERT™ XP/XPI Headset" with the
"3M™ Connected Equipment" mobile application
supporting both Android and iOS. When connected to the
mobile application you will have access to settings,
configurations, user instructions etc.
NOTE: For more information go to the "App Store" or
"Google Play" and download the "3M™ Connected
Equipment" application. For support on the "3M™
Connected Equipment", please see information in the
mobile application.
8.6. BLUETOOTH
®
8.6.1. BLUETOOTH MULTIPOINT TECHNOLOGY **
®
This headset supports Bluetooth
Use Bluetooth Multipoint technology to connect your
®
headset to two Bluetooth
®
Depending on the type of Bluetooth
and their current activities, the headset controls the
Bluetooth devices in different ways. The headset
®
prioritizes and coordinates activities from the connected
Bluetooth devices.
®
16
Multipoint technology.
®
devices at the same time.
devices connected
®
** 3M™ PELTOR™ WS™ ALERT™ XPI Headset
8.6.2. PAIRING A BLUETOOTH
(Figure. 2, Figure. 5)
The first time the headset is powered on, it automatically
enters pairing mode. A voice message confirms,
pairing on". Pairing mode can also be entered
"Bluetooth
®
from the menu. This is necessary for pairing a second
device.
See "Configuring your headset".
Make sure that Bluetooth communication is activated on
®
your Bluetooth device. Search and select "WS Alert XP"
®
or "WS Alert XPI" on your Bluetooth
message confirms when the pairing is complete, "Pairing
complete" and "Connected".
NOTE: You can always stop the pairing process by a long
press (~2 s) on the Bluetooth
NOTE: Only one of the two paired devices can be a
two-way radio. ** The headset only supports two-way
radio with 3M™ PELTOR™ Push-To-Talk protocol. If you
have any questions, please contact your local distributor.
NOTE: When a third Bluetooth
paired, one of the previous paired devices is removed
from the headset. If one of the devices is connected, the
unconnected device is removed. Otherwise, the first
paired device is removed. **
8.6.3. RECONNECTING BLUETOOTH
When the headset is powered on, it tries to reconnect to
all paired devices during 5 minutes. A voice message will
confirm the connection, "Connected".
NOTE: If the link is lost, the headset will try to reconnect
during 30 seconds. A voice message will inform you if
your link is lost, "Disconnected".
DEVICE
®
device. A voice
®
button.
®
device is successfully
®
DEVICES
®