3M PELTOR WS ALERT XP Manual Del Usuario página 14

8.7. CONNECTED TO PHONE
8.7.1. CONNECTED AND OPERATING ONE PHONE /
CONNECTED AND OPERATING TWO PHONES **
(Figure. 7)
Bluetooth
®
State
button
No activity
Streaming
Incoming call
Outgoing call/Call
in progress
Short press
Call in progress
on one phone,
incoming call on
second phone **
No activity/
Streaming
Incoming call
Call in progress
Long press
Call in progress
on one phone,
incoming call on
second phone **
Short double
Streaming
press
Short triple
Streaming
press
8.8. CONNECTED TO TWO-WAY RADIO /
CONNECTED TO TWO-WAY RADIO AND
PHONE **
8.8.1. OPERATING TWO-WAY RADIO
(Figure. 7)
Bluetooth
®
State
button
No activity/
Press
Streaming
Transmitting on
Release
two-way radio
8.8.2. CONNECTED TO PHONE AND TWO-WAY
(Figure. 7)
Action
Play
Pause
Answer
End call
End ongoing call,
answer incoming
call **
Voice control on the
last paired device **
Reject
Toggle call between
phone/headset
NOTE: When connected to a two-way radio you cannot
control the audio playback unit from the headset. **
NOTE: If you have an ongoing phone call, you will hear two
beeps for incoming calls on the two-way radio. To end the call
Reject incoming call
and switch to the incoming two-way radio call, short press
(~0,5 s) the Bluetooth
Bluetooth
or wait for the next incoming two-way radio message. **
DID YOU KNOW: Audio playback will be automatically
Skip to next track paused from audio playback unit when you have a call in
progress or a two-way radio message. ** After ending the call
/ voice message the audio playback will automatically start
again.
9.
Go to previous track
9.1. CONFIGURING YOUR HEADSET
(Figure. 11)
Long press (~2 s) the Menu button [M] to access the
configuration menu. A voice message will confirm "Menu".
Short press (1 s) the Menu button [M] to navigate through the
menu. A voice message will confirm each menu step. Short
press (~0,5 s) the [ + ] or [–] button to activate/deactivate/
change different configurations.
The following options exist in the configuration menu:
1. Bluetooth
Action
When the voice message says "Bluetooth
Start transmitting on
press (1 s) the [ + ] button to start pairing. Short press (~0,5 s)
two-way radio
the [–] button to stop pairing. A voice message will confirm
"Bluetooth
Stop transmitting on
or "WS ALERT XPI" on your Bluetooth
two-way radio
message will confirm when pairing is complete, "Pairing
complete" and "Connected". Short press (~0,5 s) the [–]
** 3M™ PELTOR™ WS™ ALERT™ XPI Headset
RADIO**
OPERATING PHONE **
Bluetooth
®
State
button
Incoming call
Outgoing call/Call
in progress
Ongoing reception
on two-way radio
Short press
and incoming call
Ongoing phone
call and reception
on two-way radio
Incoming call
Long press
Call in progress
button. Short press (~0,5 s) the
®
button one more time to listen to the two-way radio
®
MENU FUNCTIONS
pairing
®
(Figure. 6)
pairing on". Search and select "WS ALERT XP"
®
EN EN
Action
Answer
End call
Answer
End call
Reject
Toggle call between
phone/headset
pairing", short
®
device. A voice
®
17