Lister WZG SG 3 Instrucciones De Uso página 14

EN
3. Insert batteries
as illustrated in
the left
compartment with
the '+' pole
facing down
and in the right
compartment with
the '+' pole
facing up.
Remove the batteries from the device if the electric fence energiser has not been in
use for a long period of time.
The WZG fence energiser can also be operated with an external 12 V battery.
Connecting the Battery: see section 6. Remove the batteries from the device if the
electric fence energiser is operated with an external battery.
6. Connecting the Battery
WZG SG 3 is also suitable for operation with a 6/12V battery.
IMPORTANT!
energiser is operated with an external battery!

Use the cable included for connecting the battery. The WZG SG 3 is connected
on the bottom of the device. Make sure that the poles are not reversed!

Connect the '+' pole to the same side where the pulse control knob is located.
Connect the '-' pole on the other side
REMOVE THE BATTERIES BEFORE CONNECTING
THE EXTERNAL BATTERY
14
Remove the batteries from the device if the electric fence
***WARNING***
Battery insertion
The battery
symbols are shown
arrangement is
on inside of lid.
marked in the
device's lid