Arkray GLUCOCARD Shine Connex Manual Del Usuario página 29

Step 3
Shake the GLUCOCARD
Shine Control Solution bottle
before each test.
Remove the cap and squeeze
the bottle to discard the first
one or two drops.
Wipe the tip with a clean
tissue or cloth. Dispense a drop of control solution onto a clean
non-absorbent surface. It helps to squeeze a drop onto the top of
the cap as shown.
After the
solution to the narrow edge of the test strip until the meter
beeps. Make sure the confirmation window fills completely.
NOTE
• The meter may switch off if the control solution sample
is not applied within two minutes of the
appearing on the screen.
• If the meter turns off, remove the test strip, reinsert, and start
from step 1.
symbol appears on the display, apply the
symbol
www.arkrayusa.com 29