Arkray GLUCOCARD Shine Connex Manual Del Usuario página 47

Setting the Alarm Function
Four types of alarms can be set in the GLUCOCARD Shine
Connex Meter: one post-meal alarm (PP2 Alarm) and three time
set alarms (alarm 1–3).
• The PP2 Alarm goes off two hours after setting the alarm.
• The alarms ring for 15 seconds and can be silenced by pressing
any button, or by inserting a test strip.
Setting the Post-meal Alarm (PP2 Alarm)
Step 1 Turning the PP2 Alarm On
Without inserting a test strip,
press and hold the < button
for three seconds to set the
post-meal alarm.
'PP2', the symbol, and
'On' will be displayed. The
screen will then automatically
change to the memory
recall mode.
At this time, the
indicating that the PP2 Alarm
has been set, will be displayed on the screen.
NOTE
• The PP2 Alarm will automatically turn off if the meter's time
setting is adjusted to more than two hours before or just past
the currently activated PP2 Alarm time.
symbol,
www.arkrayusa.com 47