Descargar Imprimir esta página

Zummo Z14 Manual De Usuario página 27

Ocultar thumbs Ver también para Z14:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 3
The squeezing kit that is most suitable for the size of fruit to be squeezed should be used at all
times. This will ensure the best performance and will also avoid incidents with your machine (e.g.
if a kit is used that is too small for the fruit, this could cause blockages, feed faults, irregular cutting
or squeezing oils out of the peel).
* The squeezing kits consist of Cups, Balls and Separator. The inner hopper and funnel
supplement are required when using the small kit.
Depending on the thickness of the skin or peel of the fruit to be squeezed, the squeezing route
can be regulated using the washers under the balls*:
-
For extra thin peel or skin, a washer can be added to each of the balls.
-
For very thick peel or skin, the washers should be removed from the balls to avoid the
machine from blocking.
* Only for threaded balls, not available for balls attached with clips.
When filling the fruit hopper, do not place weight on it, as it could break.
When squeezing pomegranates, we recommend removing the calyx to optimise squeezing.
Switch the machine off at the power switch at the end of the day [Fig. 1].
5.10. SAFETY SYSTEMS AND DISPLAY WARNINGS
The machine features several safety systems:
1. If the hopper is not fitted properly, the machine will not start. The display will show "Error" and
the hopper will be shaded and flash.
2. If the front cover is not fitted properly, the machine will not start. The display will show "Error"
and the front cover will be shaded and flash.
3. If the ADAPT tray / SERVICE tank is not fitted properly, the machine will not start. The
display will show "Error" and the tray will be shaded and flash.
4. If the bins / chutes are not fitted properly, the machine will not start. The display will show
"Error" and the relevant bin / chute will be shaded and flash.
5. If the machine becomes blocked during operation, the motor will stop so as not to cause
any major damage and the display will show "Error" and the tools icon. The cause of the
blockage will then have to be removed.
27

Publicidad

loading

Este manual también es adecuado para:

Z14a-nZ14b-nZ14c-n