Hella Gutmann SEG V Manual Del Usuario página 110

7. | Device configuration
2. Open the selection window under Level compensation with
3. Open the list under Level compensation with
4. Select >Off<.
When >Off< is selected, level compensation is switched off.
5. Confirm the selection with . Abort the procedure with .
The selection will be saved automatically.
7.6.9. Start factory reset
Use this function to reset the device to factory settings.
All customer-specific data records will be reset if you perform the factory reset.
Proceed as follows to perform a factory reset:
1. Select Settings > Device > Extended in the main menu.
2. Use to start the factory reset under Start factory reset.
Observe the confirmation prompt.
3. Confirm the confirmation prompt with
The device will be automatically reset to the state of delivery.
7.7. Updating the Device
Perform device updates here. Various system parameters are also displayed, e.g.:
• Software version
• Hardware version
• Device number
Hella Gutmann Solutions supplies customers with software updates at varying intervals. The software installation re-
quires a license. These updates contain technical modifications and improvements. We recommend keeping your device
up to date with these updates.
7.7.1. Preconditions for an Update
Ensure the following to perform updates:
• Voltage supply of the device is ensured.
• The shop has a valid license.
7.7.2. Starting the Software Update
Start the update of the device's software here.
Proceed as follows to start the software update:
110
.
.
.
Hella Gutmann
SEG V