Hella Gutmann SEG V Manual Del Usuario página 133

Hella Gutmann
NOTICE
First configure the interfaces before you can send the report per e-mail. For this perform the steps as de-
scribes in section Configuring interfaces [} 111].
Now the following fault messages during e-mail sending may appear despite correctly configured interfaces:
• The device is not registered at Hella Gutmann. Please contact the Hella Gutmann Help Line.
• Registration was not successful. Please check the time and date settings. Please contact the Technical Help Line of Hella
Gutmann if the problem occurs again.
8.5. Quick test
In the quick test, headlights can be checked without entering specific vehicle data. The headlight settings must be known
for the vehicle.
NOTICE
From software version 74 onwards it is possible to save the results also after the measurement. The steps
are identical as with the "Documented test" (see Documented test [} 127]).
8.5.1. Preconditions for a Quick Test
Ensure the following to perform a quick test:
• The steps in the sections Preparing headlight test [} 118] and Aligning the SEG V [} 124] are performed com-
pletely.
8.5.2. Performing Quick Tests
Proceed as follows to perform the quick test:
1. Select >Quick test< in the main menu.
2. Observe the info window where necessary.
3. Confirm the info window with
The Target specifications window appears.
NOTICE
From software version 74 onwards, you can select the correct light distribution, e.g. for antiglare high beam,
with the manufacturer-specific name in the menu Adaptive light control. Hence you are able to check such
light systems even if the vehicle is not in the database.
SEG V
where necessary.
Working with the Device | 8.
133