Hella Gutmann SEG V Manual Del Usuario página 112

7. | Device configuration
7. Open the virtual keypad with
8. Enter the Wi-Fi password.
9. Close the virtual keypad with
10. Confirm your input with
The input will be saved automatically.
If the connection to the Wi-Fi network was successfully set up, the name of the selected Wi-Fi network is shown under
Wireless network (SSID).
ð Now you can start working with Wi-Fi connection.
7.9.2. Test Wi-Fi configuration
Proceed as follows to test the Wi-Fi configuration:
1. Select Settings > Device > Interfaces > Network in the main menu.
2. Use for the function Test Wi-Fi configuration.
The Wi-Fi configuration is tested.
ð The address of the selected Wi-Fi network is displayed under SEG V IP address if the Wi-Fi configuration has been
tested successfully.
7.9.3. Reset Wi-Fi configuration
Reset the Wi-Fi configuration again here.
Proceed as follows to reset the Wi-Fi configuration:
1. Select Settings > Device > Interfaces > Network in the main menu.
2. Reset Wi-Fi configuration with
The Wi-Fi configuration is reset.
7.9.4. Sending Reports by E-Mail
Take the corresponding e-mail settings before you can send reports by e-mail.
Proceed as follows to take e-mail settings:
1. Select Settings > Device > Interfaces > E-Mail in the main menu.
2. Open the virtual keypad under Receiver address with
3. Enter the e-mail address of the receiver.
4. Close the virtual keypad with
5. Open the list under Server settings with
Further settings are not necessary if >Automatically< is selected.
Continue with steps 6-22 if >Manually< is selected.
112
.
.
.
.
.
.
.
Hella Gutmann
SEG V