Assembly; Before Operation - K-JAPAN KJRH300 Manual Del Propietário

BLOWER PIPES INSTALLATION
WARNING! Stop the engine before installing or removing blower pipes.
1. Align groove in pipe A with pegs on
blower housing and slide pipe A on to
housing.
2. Rotate pipes A clock wise to lock it into
place.
3. Align groove in pipe B with pegs on pipe
A and slide pipe B until proper position.
4. Align groove in pipe B with pegs on pipe
A and slide pipe B until proper position.
FUELING
WARNING! The following precautions will lessen the risk of fire.
1. Do not smoke near fuel.
2. Mix and pour fuel outdoors and where there are no sparks or flames.
3. Always shut off the engine before refueling. Never remove the fuel tank cap while the engine
is running or immediately after stopping the engine.
4. Always open the fuel tank cap slowly to release any possible pressure inside the tank.
5. Do not overfill the fuel tank. Stop filling 10 ~ 20 mm from the top of the
tank.
6. Tighten the tank fuel cap carefully but firmly after refilling.
7. Wipe up any spilled fuel before starting the engine.
8. Move the Handheld Blower at least 3 m away from the fueling location
and fuel storage container before starting the engine.
English

ASSEMBLY

1
2

BEFORE OPERATION

— 5 —
1
2
Peg
3
4
Min. 3 m