Product Description - Ottobock Meridium 1B1 Instrucciones De Uso

Ladegerät
Lagerung und Transport ohne Verpackung
Betrieb
Eingangsspannung
1 Foreword
INFORMATION
Last update: 2016-01-25
► Please read this document carefully before using the product.
Follow the safety instructions to avoid injuries and damage to the product.
►
► Receive instruction in the correct and safe use of the product by qualified personnel.
► Please contact the qualified personnel if you have questions about the product (e.g. regard­
ing the start-up, use, maintenance, unexpected operating behaviour or circumstances).
Contact information can be found on the back page.
Please keep this document in a safe place.
►
From this point, the product "1B1 Meridium" shall be referred to simply as the product/compon­
ent/prosthesis/prosthetic foot.
These instructions for use provide you with important information on the use, adaptation and
handling of the product.

2 Product description

2.1 Design
The product consists of the following components:
-25 °C/-13 °F bis +70 °C/+158 °F
max. 93 % relative Luftfeuchtigkeit, nicht kon­
densierend
0 °C/+32 °F bis +40 °C/+104 °F
max. 93 % relative Luftfeuchtigkeit, nicht kon­
densierend
12 V
1. Cover/connection plate
2. Cover cap with charging receptacle
3. Battery
4. Ankle spring
5. Heel bracket
6. Ankle axis
7. Heel spring
8. Hydraulic unit
9. Toe axis
10. Toe plate
11. Carbon fibre frame
12. Main electronics
English
Ottobock | 37