Changing The Presser Foot; To Attach; To Remove; To Remove And Attach The Foot Holder - Janome Hello Kitty 18750 Manual De Instrucciones

w
q
q
e
w
r

Changing the Presser Foot

CAUTION:
When attaching or removing presser foot, turn OFF the
power switch and remove the needle from the needle
clamp.

• To attach

Insert the presser foot pin q into the slit w of the presser
holder and push the presser foot to lock it in place.

• To remove

Pull the foot in the direction of arrow to remove the presser
foot.
q Pin
w Slit

To Remove and Attach the Foot Holder

CAUTION:
When attaching or removing foot holder, turn OFF the
power switch and remove the needle from the needle
clamp.
• To remove
Remove the setscrew by turning it counterclockwise with
the screwdriver and remove the foot holder.
• To attach
Match the hole in the foot holder with the threaded hole in
the presser bar. Fit the setscrew into the hole. Tighten the
screw by turning it clockwise with a screwdriver.
q Setscrew
w Foot holder
e Hole
r Threaded hole
18