To Adjust Buttonhole Stitch; To Adjust The Stitch Width; To Adjust The Stitch Density; Round-End Buttonhole - Janome Hello Kitty 18750 Manual De Instrucciones

q
w
q
w
q w e
q w e
e
e

To Adjust Buttonhole Stitch

• To adjust the stitch width

Press the cursor buttons to move the cursor under
the stitch width value "5.0" q (default setting).
Press the button to decrease buttonhole width w.
Press the button to increase buttonhole width e.
The stitch width can be varied from 2.5 to 7.0 depending
on the selected buttonhole.

• To adjust the stitch density

Press the cursor buttons to move the cursor under
the stitch density value "0.4" q (default setting).
Press the button to make the buttonhole stitch
denser w.
Press the button to make the buttonhole stitch less
dense e.
The stitch density can be varied from 0.3 to 0.8 depending
on the selected buttonhole.

Round-End Buttonhole

Machine setting
q Stitch pattern:
w Needle thread tension:
e Presser foot:
Sewing procedure is the same as square buttonhole.
The stitch width can be varied from 2.5 to 5.5.
To change the stitch width or stitch density, refer to the
"Adjusting the stitch density" section above.

Keyhole Buttonhole

Machine setting
q Stitch pattern:
w Needle thread tension:
e Presser foot:
r Eyelet punch
Sewing procedure is the same as square buttonhole.
Use the seam ripper and an eyelet punch r to open the
r
buttonhole.
The stitch width can be varied from 5.5 to 7.0.
To change the stitch width or stitch density, refer to the
"Adjusting the stitch density" section above.
* An eyelet punch is an optional item.
68
06
1 to 5
Automatic buttonhole foot: R
07
1 to 5
Automatic buttonhole foot: R