Multiple-Zigzag Stitch; Seam Finishing; Mending; Overedge Stitch - Janome Hello Kitty 18750 Manual De Instrucciones

q w e
q w e
q w e

Multiple-zigzag Stitch

Machine setting
q Stitch pattern:
w Needle thread tension:
e Presser foot:

• Seam finishing

This stitch is used to finish the seam allowance on
synthetics and other fabrics that tend to pucker. The stitch
is also excellent for darning and mending tears.
Place your fabric to allow a 5/8˝ (1.5 cm) seam. Trim
excess close to stitching. Be careful not to cut the stitches.

• Mending

Position the tear under the needle so that the stitch
catches both sides.

Overedge Stitch

Machine setting
q Stitch pattern:
w Needle thread tension:
e Presser foot:
Carefully guide the fabric so the needle falls off the edge
when it swings to the right.

Serging

Machine setting
q Stitch pattern:
w Needle thread tension:
e Presser foot:
Place your fabric to allow a 5/8˝ (1.5 cm) seam. Trim
excess close to stitching. Be careful not to cut the stitches.
78
11
3 to 6
Zigzag foot: A
12 or 14
3 to 6
Zigzag foot: A
13
3 to 6
Zigzag foot: A