Applique; To Adjust The Stitch Width; Fagoting - Janome Hello Kitty 18750 Manual De Instrucciones

q w e
q
e
y
q w e
w
r
t
q
w

Applique

Machine setting
q Stitch pattern:
w Needle thread tension:
e Presser foot:
* The stitch width of pattern 31 – 33 can be changed
without changing its center needle position.
Place an applique on the fabric and baste or pin it in place.
Sew while guiding the fabric so the needle falls along the
outer edge of the applique.
q Applique
w Outer edge
• To adjust the stitch width
Select pattern 31.
Press the cursor buttons to move the cursor under
the stitch width value "3.5" e (default setting).
Press the button to decrease the stitch width r.
Press the button to increase the stitch width t.
The stitch width will be varied based on the centered
needle drop position y.
e Stitch width (3.5)
r Stitch pattern 31 (stitch width decreased)
t Stitch pattern 31 (stitch width increased)
y Center needle drop position

Fagoting

Machine setting
q Stitch pattern:
w Needle thread tension:
e Presser foot:
q Paper or tear-away backing
w 1/8˝ (0.3cm)
Use this stitch to join two pieces of fabric to create an open
work appearance, and add design interest. Fold under
each fabric edge 1/2˝ (1.3 cm) and press. Pin the two
edges to paper or tear-away backing 1/8˝ (0.3 cm) apart.
Sew slowly, guiding the fabric so the needle catches the
folded edge on each side.
56
31, 32 or 33
1 to 4
Satin stitch foot: F
34
3 to 6
Satin stitch foot: F